Soap base Crystal NS (No sweat, Anti-condensation) transparent 11,5 kg (1 pc)

A plant-derived soap base specially formulated for wet conditions, used to make clear bars of soap.

Product Features    Specially formulated for wet conditions    Ideal for making simple unrolled bars of soap    Fantastic clarity allows vibrant colors to stand out    Good foaming efficiency    Excellent color stability    Neutral scent provides excellent scenting    Suitable for cutting or molding

To create your own handmade glycerin soap kit, here's what you'll need:
1. Cut Crystal NS into small pieces;
2. Add fragrance or essential oil;
3. Add dry botanicals if desired;
4. Melt in the microwave or in a water bath;
5. Pour into mold. A simple recipe for making handmade soap:

1.Open/Cut - Simply open the package, safely cut the Crystal soap base into smaller cubes, making the soap easier to process and melt.
2. Melt - Heat the soap base gradually so that the soap melts evenly and does not boil or burn. If you melt in the microwave, be careful and keep an eye on the soap as it may bubble on the container.3. Mix - You can use essential oils, fragrances, colors, botanicals and additives. Simply add to your melted soap base, stirring gently to distribute any fragrance you add evenly throughout the soap base.4. Pour - Working quickly, simply pour the soap base into the soap mold. At this point you can add the dried botanicals to the surface of the soap, gently pressing them into the top of the soap if you wish.5. Create - Once your soaps are set and fully cured, simply remove them from the molds. We recommend always wrapping your soap bars immediately after removing from the mold to protect and preserve the soap.

Compound:

Aqua 25–50
Propylene Glycol 10 –25
Sodium Stearate 10 –25
Sorbitol 10 -25
Sucrose 5–10
Sodium Laureth Sulfate 5 –10
Sodium Laurate 1–5
Glycerin1 –5
Sodium Myristate 1 –5
Sodium Lauryl Sulfate 1 –5
Sodium Chloride 1–5
Stearic Acid 0.1 –0.5
Lauric Acid 0.1 –0.5
Pentasodium Pentetate <0.1
Tetrasodium Etidronate<0.1.